Yiqigou 10 Pairs 8.0mm Gold-Plated Bullet Connectors for RC Batteries and ESC
Yiqigou 10 Pairs 8.0mm Gold-Plated Bullet Connectors for RC Batteries and ESC
Yiqigou's 10-pair set of 8.0mm male and female bullet connectors (also called banana plugs) offer a reliable way to connect your RC battery, ESC, and motor. Each connector is made of copper with a gold-plated surface, designed to provide low resistance and resist corrosion for consistent electrical flow. These are commonly used with RC helicopters, cars, trucks, and other remote-controlled vehicles.
What Makes These Connectors Stand Out?
The small hole at the tip of both the male and female ends is a practical detail that makes wire insertion easier during soldering. The gold plating helps maintain a clean connection over time, and the copper core supports efficient current transfer. While specific current ratings aren't provided, the construction is typical for hobby-grade RC applications.
Key Specifications at a Glance
| Quantity | 10 pairs (10 male + 10 female) |
| Diameter | 8.0mm |
| Material | Copper with gold plating |
| Type | Male and female bullet connectors (banana plugs) |
| Common Uses | RC battery, ESC, motor connections; model line wiring |
Common Questions About These Bullet Connectors
Are these suitable for high-power RC setups?
The copper construction and gold plating help reduce resistance, which is beneficial for power delivery. However, the manufacturer does not specify a maximum current rating, so you should verify compatibility with your specific setup's power demands.
What gauge wire fits the small hole?
The hole diameter is not listed, but it's designed for typical hobbyist wire sizes. You can insert tinned wire into the hole and solder for a secure connection.
Can I use these for RC car batteries?
Yes, these connectors are commonly used to connect batteries to ESCs in RC cars, trucks, and other vehicles. The 8.0mm size is a standard for many mid-to-large scale models.
Do they come pre-soldered?
No, the connectors require soldering to attach wires. The small hole makes the process straightforward.
How to Use Them with Your RC Setup
To install, strip the insulation from your wire ends, tin the wire with solder, insert it into the hole on the connector, and apply heat from a soldering iron. Ensure all connections are secure before use. The male plugs fit snugly into the female sockets, and the gold plating helps maintain conductivity over repeated connections.
With 10 pairs, you have enough connectors for multiple batteries, ESCs, or motor connections. Store them in a dry place to preserve the gold plating condition.