MOHERO 2 LEDs Angel Eyes & Demon Eyes LED Headlights for 1/10 RC Crawler Cars (Red+White, 17mm)
MOHERO 2 LEDs Angel Eyes & Demon Eyes LED Headlights for 1/10 RC Crawler Cars (Red+White, 17mm)
The MOHERO 2 LEDs Angel Eyes & Demon Eyes LED Headlights are a pair of round, pre-wired LED light units designed for 1/10 scale RC crawler cars. Each headlight measures 17mm in outer diameter with a 10mm inner light, and the 50cm cord allows flexible mounting. The set offers two lighting options: a constantly lit outer halo (angel eye) and a switchable inner light (demon eye) in red or white. They operate on 4.2V–6V input and can plug directly into the receiver's BATT jack.
What makes these RC headlights different?
Unlike basic single-mode lights, these combine a fixed halo ring with a controllable center beam. The outer ring stays on to mark the vehicle's position, while the inner light can be toggled via the included switch for extra illumination or a custom look. This design gives you functional and aesthetic flexibility during low-light crawling.
Technical specifications
| Color | Red / White (outer halo always on, inner switchable) |
| Shape | Round |
| Finish Type | Polished |
| Light Source | Light Emitting Diode (LED) |
| Power Source | Battery Powered (4.2V–6V input) |
| Outer Diameter | ~17mm |
| Inner Light Diameter | 10mm |
| Cord Length | ~50cm |
| Wiring | Pre-wired with servo-style plug |
| Switch | Yes (controls inner light) |
Installation guide
Mounting requires two holes (~17mm) in the car shell, made with a hole saw or sharp tool. Secure each light with hot glue or AB glue. The wiring is 18 inches long; connect the plug directly to the receiver's BATT jack or a compatible light controller. No soldering needed for basic operation.
Compatibility notes
These lights fit most 1/10 scale RC crawlers and trucks with standard servo plugs. The 4.2V–6V operating range is compatible with typical receiver outputs and 2S LiPo batteries. The 17mm diameter is a common size for aftermarket light buckets, but always measure your mounting area before cutting.
Common buyer questions
What voltage do these headlights need?
They accept 4.2V to 6V input, which matches most RC receiver outputs and 2S LiPo batteries.
Can I turn off the inner light separately?
Yes, the included inline switch controls the center LED while the outer halo remains on.
Are they plug-and-play?
Yes, the pre-wired servo plug can connect directly to the receiver's BATT jack. No additional controller is required, though a light controller can be used for more features.
Do they fit my 1/10 RC car?
They are designed for most 1/10 crawlers and trucks. Verify that your mounting surface can accommodate a 17mm hole and that your receiver provides the correct voltage.