INJORA Pre-Mounted Pin Buggy Tires & Wheels for 1/28 Losi Micro-T (4-Pack, Magenta)
INJORA Pre-Mounted Pin Buggy Tires & Wheels for 1/28 Losi Micro-T (4-Pack, Magenta)
A set of four pre-mounted pin buggy tires and wheels from INJORA, designed for the 1/28 Losi Micro-T. Each tire uses a high-traction B1 rubber compound with a micro pin tread pattern for off-road grip. The one-piece nylon wheels are lightweight at 5.3 g each and have a 7 mm hex size. The magenta color adds a scale-inspired look. They come pre-mounted for easy installation.
What makes the INJORA B1 rubber compound stand out?
The B1 compound is formulated to deliver grip on a range of surfaces, from loose dirt to pavement. It helps the tires bite into terrain without being overly soft, balancing traction and durability for the small 1/28 scale.
Micro pin tread pattern for off-road control
Small pin-shaped lugs cover the tire surface, providing multiple edges to dig into soil, gravel, or grass. This pattern is common on buggy tires because it sheds mud and maintains contact on uneven ground.
Pre-mounted convenience and lightweight design
The tires arrive already mounted on nylon wheels, so you can install them directly on your Micro-T without gluing or assembling. The one-piece nylon wheels keep weight low, reducing unsprung mass and helping suspension response. At just 5.3 g per corner, they minimize rotational inertia for quicker acceleration and braking.
Specifications
| Quantity | 4 tires & wheels (pre-mounted) |
| Tire compound | INJORA B1 rubber |
| Tread pattern | Micro pin |
| Wheel material | Nylon |
| Wheel color | Magenta (also available in white and yellow) |
| Weight per unit | 5.3 g |
| Wheel hex size | 7 mm |
| Compatibility | 1/28 Losi Micro-T |
How do you install these tires on the Losi Micro-T?
Because they are pre-mounted, installation is straightforward: remove the old tire/wheel from the hex hub, then press the new wheel onto the same 7 mm hex. The fit is designed to match the Micro-T exactly, so no modifications are needed.
Common questions about the INJORA pin buggy tires
Are these tires compatible with other 1/28 RC cars?
The product is specified for the 1/28 Losi Micro-T. Compatibility with other models is not confirmed in the supplied data, so you would need to check the hex size and wheel offset.
What is the wheel hex size?
The hex is 7 mm, which is standard for the Losi Micro-T.
How much does each tire weigh?
Each tire and wheel assembly weighs 5.3 grams.
What colors are available?
The wheels come in white, yellow, and magenta. This set is magenta.