INJORA 4LED Rock Lights Kit for 1/10 RC Crawlers – White
INJORA 4LED Rock Lights Kit for 1/10 RC Crawlers – White
These INJORA 4LED Rock Lights are designed for 1/10 scale RC crawlers like the SCX10 and TRX4. They feature CNC machined aluminum mounts with M3 screws for secure attachment, a wire length of about 340mm (13.39in), and a separate controller (175mm/6.89in) that offers steady, breathing, and strobe modes. The kit includes locking nuts and cable ties for easy installation, and you can control the lights manually or via your transmitter's CH3 button.
Lighting Modes and Control Options
The controller provides three distinct lighting patterns: steady (constant on), breathing (slowly pulsing), and strobe (rapid flashing). Switching between modes is straightforward—press a button on the controller or use the CH3 channel on your RC transmitter if you prefer integrated control. The voltage range is 5-7.4V, making these lights compatible with most standard receiver outputs or separate battery packs within that range.
Installation and Mounting Details
Each of the four LED units comes with a CNC-machined aluminum mount that uses M3 screws. The package includes locking nuts and cable ties to help route and secure wires along your chassis. With a wire length of roughly 340mm (13.39in) per light, you've got enough slack to reach a central controller or power source on most 1/10 scale rigs. The controller itself is about 175mm (6.89in) long and can be tucked away inside the chassis or mounted with double-sided tape.
Rock Light Specs at a Glance
| Material | Aluminum (CNC machined) |
| Mounting Screw | M3 |
| Voltage Range | 5-7.4V |
| Wire Length (per light) | ~340mm (13.39in) |
| Controller Length | ~175mm (6.89in) |
| Lighting Modes | Steady, Breathing, Strobe |
| Light Color | White |
| Included Items | 4 LEDs with mounts, controller, locking nuts, cable ties |
How Do These Lights Mount to the RC Chassis?
The aluminum mounts are pre-drilled for M3 screws, so you just need a suitable mounting point on your chassis (often existing holes on the axles, links, or frame rails). Use the provided locking nuts to keep them secure under vibration. Cable ties help bundle any excess wire neatly. The controller can be mounted with double-sided tape or zip ties. No permanent modifications are required in most cases.
Answers to Common Questions
Can I use these lights with a 3S LiPo battery?
The supplied voltage range is 5-7.4V, so a 3S LiPo (11.1V) would exceed the recommended input. Use a BEC or voltage regulator to step down if you want to run them on 3S.
Do the lights come with a power connector?
The description does not specify a connector type. You may need to solder or crimp your own connector to match your receiver or battery. The kit includes the controller and lights, but no connector is mentioned.
Are these lights waterproof?
The supplied information does not mention waterproofing. While they may handle light splashes, avoid submerging them unless you add your own waterproofing.
Can the controller be bypassed for always-on operation?
The controller is required to power the lights, as it manages the modes. If you only want steady on, just select that mode and leave it.