HTRC LiPo Battery Charger 2S-3S Compact Balance Charger for 7.4-11.1V RC Batteries
HTRC LiPo Battery Charger 2S-3S Compact Balance Charger for 7.4-11.1V RC Batteries
This HTRC balance charger is built for 2S and 3S LiPo battery packs (7.4–11.1V). It charges each cell independently to help every cell reach full capacity, which can extend overall battery life. The compact design and built-in balance port make it a practical choice for RC hobbyists who need a simple, reliable charger.
How the independent cell charging works
Each cell in your LiPo pack gets its own charging circuit. Instead of charging the whole pack as one unit, the charger monitors and tops off each cell separately. This helps prevent some cells from being undercharged while others are overcharged, a common issue that can reduce battery performance over time. The balance charge current is 800mA, and the maximum output for each of the three channels is 1000mA.
Specs at a glance
| Input voltage | AC 100–240V |
| Balance charge current | 800mA |
| Max output current | 3 × 1000mA |
| Compatible batteries | 2S–3S LiPo (7.4–11.1V) |
| Dimensions | 1.2" D × 2.1" W × 3.5" H |
| Weight | 0.18 lb |
LED status indicator
A two-color LED shows the charging state: red while charging, green once the battery is fully charged. This gives you a clear visual cue without needing to check a display.
What's included
- HTRC balance charger
- AC power cable
- User manual
- Color box packaging
Important notes on use
This charger is designed only for 2S and 3S LiPo batteries. It cannot charge 2S and 3S packs at the same time, and it is not suitable for LiFe, NiMH, or other battery chemistries. Always connect the balance lead to the corresponding port on the charger before starting a charge cycle.
Common questions about this LiPo charger
Can I charge a 4S LiPo battery with this charger?
No. This charger only supports 2S (7.4V) and 3S (11.1V) LiPo packs. Attempting to charge a 4S battery could cause damage or safety issues.
Can I charge two batteries at the same time?
The charger has one balance port for a single pack. It cannot charge two separate batteries simultaneously. Only one 2S or 3S pack per charge cycle.
Does the charger automatically stop when the battery is full?
Yes. The LED turns green when charging is complete, and the charger stops delivering current to prevent overcharging.
Is this charger compatible with other battery types like LiFe or NiMH?
No, it is designed specifically for LiPo batteries. Using it with other chemistries may not charge them correctly and could be unsafe.