1/10 RC Car Police Lights - 9 Flash Modes Blue&Red LED 145mm for Crawler Trucks
1/10 RC Car Police Lights - 9 Flash Modes Blue&Red LED 145mm for Crawler Trucks
This set of 1/10 scale RC car police lights delivers nine distinct flashing patterns, including strobe, fast flash, slow flash, cyclic flash, and alternating sequences. Designed for 1/8 and 1/10 crawlers, off-road trucks, and rally cars, the light bar draws power directly from the receiver—no separate battery needed. The blue&red 145mm version shown here features a durable plastic housing made by precision injection molding.
How many flashing modes does this police light offer?
The light includes nine pre-programmed modes, controlled via the 3-7 channels of your RC receiver. The modes are:
- Single light bead rotation cycle flashing
- 2 sets of 6 light beads flashing left and right in a circular pattern
- 2 sets of 6 light beads flickering inside and outside the loop
- 4 groups of 6 light beads flashing simultaneously
- 2 LED beads rotating and flashing in a cycle
- 2 LED beads flashing left and right in a circular pattern
- Three additional modes you can discover by cycling through the channels
Which RC vehicles does this LED light fit?
The light is compatible with many 1/10 and 1/8 scale models, including the Traxxas, Tamiya TT01 and XV01, HSP, CC01, RC4WD D90, Axial SCX10, Arrma, and other crawlers, off-road buggies, drift cars, rally trucks, and engineering trucks. The mounting holes are spaced 92mm or 122mm apart, depending on the selected size (115mm or 145mm length).
How is the light powered and installed?
No extra battery is required—the light plugs directly into a spare receiver port using a 2-pin Male JR connector (the wires are stretchable for flexible routing). The receiver provides 4.8-6V power. Make sure you have an open channel (3-7) to control the flash modes. The high-rigidity plastic casing protects against impact during off-road use.
| Voltage | 4.8-6V |
| Length | 145mm (also 115mm available) |
| Width | 22mm |
| Weight | 22g per piece |
| Installation hole distance | Approx. 122mm (short version: 92mm) |
| Material | High-quality plastic, injection molded |
| Connector | 2-Pin Male JR (stretchable wires) |
| LED colors | Red-blue, red, blue, yellow (this listing: Blue&Red) |
| Quantity | 1 piece |
What colors and sizes are available?
The police light comes in two lengths: 115mm (short) and 145mm (long). For each length you can choose red-blue, red, blue, or yellow LEDs. The package includes one light bar in your chosen style and color.
Frequently asked questions
Do I need a separate battery for this light?
No. The light is powered directly from the RC receiver (4.8-6V). Just plug it into a spare port.
Will this fit my Traxxas RC car?
It is compatible with many Traxxas models, as well as Tamiya, HSP, Axial SCX10, Arrma, and other common 1/10 and 1/8 scale vehicles. Check the mounting hole distance (92mm or 122mm) to confirm fitment.
How do I change the flashing pattern?
Use the 3rd to 7th channel on your receiver to cycle through the nine modes. The exact channel depends on your radio setup.
What is the length of the wires?
The wires are stretchable, so they can be extended slightly for better routing. The connector is a standard 2-pin JR male.
Note: The size and weight may vary slightly due to manual measurement. The actual color may differ slightly from photos due to lighting and display settings.