WONFAST RC Drift Car Wheel and Tire Set - 63mm Hard Plastic Tires for 1/10 On-Road Drifting (Red, 4-Pack)
WONFAST RC Drift Car Wheel and Tire Set - 63mm Hard Plastic Tires for 1/10 On-Road Drifting (Red, 4-Pack)
This WONFAST RC drift car wheel and tire set includes four red plastic wheels with hard tires, designed for 1/10 scale on-road drifting. Each tire measures 63mm in diameter and 26mm in width, with a wheel diameter of 52mm and a 12mm drive hex. The set is intended as a replacement or upgrade for popular RC car models from HSP, Tamiya, HPI, and Kyosho, specifically the TT02 chassis.
What You Get in This Set
The package contains four complete wheel and tire units. Each unit has a glossy red wheel rim and a hard plastic tire mounted together. The tires are made from a wear-resistant material that helps maintain drift performance over longer runs. The wheels are lightweight and should be easy to install on compatible 1/10 on-road drift cars.
Measurements and Fit
Before purchasing, check the dimensions against your car’s requirements. The tire diameter is 63mm (about 2.48 inches) with an inner diameter of 45mm (1.77 inches). Tire width is 26mm. The wheel rim itself measures 52mm in diameter. The drive hex is 12mm (0.47 inches) and the offset is 6mm. The nut fixed hole has a diameter of 4mm. These measurements are critical for ensuring proper fit on your car’s axles and hubs.
Designed for Drifting
These tires are specifically made for on-road drifting on smooth surfaces. The hard plastic compound provides low grip, which helps the car slide and maintain controlled drifts. The wear-resistant construction is meant to extend the life of the tires during repeated use. The lightweight design contributes to responsive handling.
Compatibility Notes
These wheels and tires are marketed as replacements for 1/10 scale on-road drift cars, including models from HSP, Tamiya, HPI, Kyosho, and the TT02 chassis. However, always verify fitment based on the specifications provided. The 12mm hex is standard for many 1/10 scale cars, but some models may use different hex sizes or offsets. Use the provided measurements to confirm compatibility.
Will These Fit My 1/10 Drift Car?
Fitment depends on your car’s wheel hub design. The set has a 12mm drive hex, which is common on many 1/10 scale cars. The offset is 6mm, so check your car’s suspension geometry. Measure your existing wheel’s tire diameter and width to compare with the 63mm diameter and 26mm width. If your tires are within a few millimeters, they should fit.
Specifications
| Material | Plastic |
| Color | Red |
| Finish Type | Glossy |
| Tire Diameter | 63mm (2.48 in) |
| Tire Width | 26mm |
| Inner Diameter | 45mm (1.77 in) |
| Wheel Diameter | 52mm (2.04 in) |
| Drive Hex | 12mm (0.47 in) |
| Offset | 6mm |
| Nut Hole Diameter | 4mm |
| Package Quantity | 4 units |
Frequently Asked Questions
What is the tire diameter?
The tire diameter is 63mm.
What is the drive hex size?
The drive hex size is 12mm.
Are these tires pre-mounted on wheels?
Yes, each tire is already mounted on a plastic wheel rim in the package.
What cars are these compatible with?
They are intended for 1/10 on-road drift cars from HSP, Tamiya, HPI, Kyosho, and the TT02 chassis, but always verify dimensions.