{"product_id":"surpass-hobby-programming-card-led-program-box-for-brushless-esc-25a-150a-white","title":"Surpass Hobby Programming Card - LED Program Box for Brushless ESC 25A-150A (White)","description":"\u003cp\u003eThis Surpass Hobby programming card is a dedicated LED program box for programming brushless ESCs from the same manufacturer. It is compatible with Surpass Hobby ESCs rated 25A, 35A, 45A, 60A, 80A, 120A, and 150A, and works with RC cars in scales from 1\/18 to 1\/8. The card lets you adjust braking force, reversing force, low voltage detection, start mode, and center point width.\u003c\/p\u003e\u003ch2\u003eWhich Surpass Hobby ESCs Work with This Program Card?\u003c\/h2\u003e\u003cp\u003eThis program card is designed only for Surpass Hobby brushless ESCs that are produced by the same manufacturer as the card. It supports the following ESC models: 25A, 35A, 45A, 60A, 80A, 120A, and 150A. It is not compatible with ESCs from other brands.\u003c\/p\u003e\u003ch2\u003eWhat RC Car Scales Are Supported?\u003c\/h2\u003e\u003cp\u003eThe card works with RC cars in the following scales: 1\/8, 1\/10, 1\/12, 1\/14, 1\/16, and 1\/18. It is suitable for a wide range of hobby-grade vehicles.\u003c\/p\u003e\u003ch2\u003eAdjustable Parameters\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOptions (Default in bold)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Voltage Detection\u003c\/td\u003e\n\u003ctd\u003e3.1V, 2.9V, 2.7V, No detection (default: 3.1V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStart Mode\u003c\/td\u003e\n\u003ctd\u003eNormal, Soft, Strengthened (default: Normal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Braking Force (25A\/45A\/60A)\u003c\/td\u003e\n\u003ctd\u003e50%, 25%, 75%, 100% (default: 50%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Braking Force (80A\/120A)\u003c\/td\u003e\n\u003ctd\u003e25%, 50%, 75%, 100% (default: 25%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Reversing Force\u003c\/td\u003e\n\u003ctd\u003e25%, 50%, 75%, 100% (default: 25%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Point Width\u003c\/td\u003e\n\u003ctd\u003e9%, 6%, 12% (default: 9%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e80 x 60 x 6 mm (2.4 x 1.9 x 0.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e26 g (0.92 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible ESCs\u003c\/td\u003e\n\u003ctd\u003e25A, 35A, 45A, 60A, 80A, 120A, 150A Surpass Hobby brushless ESCs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Scales\u003c\/td\u003e\n\u003ctd\u003e1\/8, 1\/10, 1\/12, 1\/14, 1\/16, 1\/18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003ePlug and play via BEC wire (match color orientation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow to Use the Program Card\u003c\/h2\u003e\u003cp\u003eUsing the card is straightforward. Connect the BEC wires from the ESC to the program card, matching the colors. Turn on the ESC. For 80A and 120A ESCs, press any key before powering on to enable programming. The green LED will flash twice and then turn off, indicating a successful connection. The white LED shows the current value. Use the \u003cstrong\u003e↓\u003c\/strong\u003e key to select a parameter, \u003cstrong\u003e→\u003c\/strong\u003e to change its value, and \u003cstrong\u003eProgram\u003c\/strong\u003e to confirm. Press \u003cstrong\u003eReset\u003c\/strong\u003e to restore factory defaults (note: power off and on again after resetting).\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this program card compatible with ESCs from other brands?\u003c\/h3\u003e\u003cp\u003eNo, it is designed only for Surpass Hobby ESCs manufactured by the same parent company as the card. It will not work with other brands.\u003c\/p\u003e\u003ch3\u003eHow do I connect the program card to my ESC?\u003c\/h3\u003e\u003cp\u003eConnect the BEC wires from the ESC to the program card, matching the color orientation. Then turn on the ESC. For 80A and 120A models, press any key before powering on to enter programming mode.\u003c\/p\u003e\u003ch3\u003eCan I restore factory settings?\u003c\/h3\u003e\u003cp\u003eYes, press the \u003cstrong\u003eReset\u003c\/strong\u003e key. After resetting, turn off the ESC and then turn it back on. The card will return to default values.\u003c\/p\u003e","brand":"ARRAROWN","offers":[{"title":"Default Title","offer_id":58076793209135,"sku":null,"price":25.69,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4478\/7503\/files\/surpass-hobby-programming-card---led-program-box-for-brushless-esc-25a-150a-white-1.jpg?v=1781562808","url":"https:\/\/toysforkid.co.uk\/products\/surpass-hobby-programming-card-led-program-box-for-brushless-esc-25a-150a-white","provider":"Toys For Kid","version":"1.0","type":"link"}