MEUS RACING Brass Wheel Spacer 10mm (6mm Offset) for TRX4M, Ascent-18, SCX24 1/18 RC Crawler
MEUS RACING Brass Wheel Spacer 10mm (6mm Offset) for TRX4M, Ascent-18, SCX24 1/18 RC Crawler
The MEUS RACING Brass Wheel Spacer is a 10mm wheel spacer that adds 6mm of width per side on 1/18 RC crawlers like the TRX4M, Redcat Ascent-18, and Axial SCX24. Made from a combination of brass and aluminum alloy, it adds weight to the wheel hubs, lowering the center of gravity to enhance stability and reduce tipping during climbs. The spacer also prevents the front tires from rubbing against steering links, improving anti-roll performance on uneven terrain.
How does the MEUS RACING brass wheel spacer improve stability?
By shifting weight lower and outward. The brass construction adds mass at the wheel, which lowers the vehicle's center of gravity. Pair that with the 6mm wider stance on each side, and you get a crawler that stays planted on sidehills and resists body roll. The offset also clears the steering link on the front axle, so you can run larger tires or articulation without interference.
Key specifications
| Product Dimensions | 1 x 1 x 1 inches |
| Item Weight | 0.317 ounces |
| Material | Brass and aluminum alloy |
| Spacer Thickness | 10mm |
| Width Increase per Side | 6mm |
| Hex Adapter | 7mm hex (removable for different offset) |
| Compatible Models | 1/18 TRX4M, Redcat Ascent-18, Axial SCX24, and similar micro crawlers |
Installation overview
Start by removing any existing wheel spacers from the hub. Slide the MEUS RACING brass spacer onto the wheel hub, then mount the wheel and tighten. Repeat for all four wheels. The internal beadlock design makes swapping tires easy—no glue required. If you want a different width, the removable 7mm hex adapter lets you adjust the offset.
Frequently asked questions
Will this spacer work on an Axial SCX24?
Yes. The spacer is designed for 1/18 micro crawlers including the SCX24, Gladiator, Deadbolt, Bronco, C10, and JLU models.
Do I need to remove the original wheel spacers first?
The directions recommend removing any original spacers before installing these for the best fit and performance.
How much wider does the track become?
Each spacer adds 6mm of width per side, for a total track increase of 12mm.
Design details
The spacer uses a two-piece construction: an outer brass ring and an inner aluminum hub with a black coating to resist corrosion. The outer brass adds low-end rotational mass, helping keep the crawler stable at slow speeds. The 7mm hex adapter is removable, giving you the option to run the spacer alone for a different offset. An internal beadlock system secures the tire without glue, making field repairs or tire swaps quick.