{"product_id":"injora-540-brushed-motor-35t-waterproof-rebuildable-rc-crawler-motor-for-1-10-scale","title":"INJORA 540 Brushed Motor 35T - Waterproof, Rebuildable RC Crawler Motor for 1\/10 Scale","description":"\u003cp\u003eThe INJORA 540 Brushed Motor 35T is a waterproof, rebuildable power plant built for 1\/10 scale RC crawlers and monster trucks. It uses dual ball bearings and high-strength magnets to deliver consistent low-speed torque, weighing 184 grams with a 3.17 mm output shaft. This 35-turn motor is a common choice for rigs like the Axial SCX10 Pro, TRX4, and Redcat Gen 8 where smooth control matters more than top speed.\u003c\/p\u003e\u003ch2\u003eWhat makes the 35T turn count a good fit for crawlers?\u003c\/h2\u003e\u003cp\u003eThe 35T winding strikes a balance between low-end torque and moderate wheel speed, helping maintain control over rough terrain. INJORA recommends 35T and 45T for RC crawlers, while 35T also suits monster trucks. Lower turn counts like 13T or 21T fit drift cars, and higher turns like 80T work for tractor trucks. This makes the 35T a versatile middle-ground option for scale trail driving and technical crawling.\u003c\/p\u003e\u003ch2\u003eSize, weight, and electrical details\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShaft length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShaft diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e184 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNominal voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 – 7.4 V (2S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 V (3S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRPM (maximum)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNote: The 50,000 RPM rating likely applies at higher voltage; actual speed depends on load and voltage used.\u003c\/p\u003e\u003ch2\u003eWhich RC vehicles are compatible with this motor?\u003c\/h2\u003e\u003cp\u003eINJORA designed this 540 motor to fit many popular 1\/10 scale trucks. The package lists support for the VP VS4-10, Redcat Gen 8, Redcat 7 Pro, SCX10 Pro, and other similar crawlers. Direct-solder tabs let you install it in various chassis layouts, and the 3.17 mm shaft works with standard pinions. Check your vehicle’s mounting holes and gear mesh before purchasing.\u003c\/p\u003e\u003ch2\u003eDual ball bearings and rebuildable design\u003c\/h2\u003e\u003cp\u003eTwo ball bearings support the rotor, reducing friction and allowing smoother spool-up compared to bushings. The rebuildable design lets you replace brushes and springs when performance drops, extending the motor’s life. When installing, solder wires directly to the tabs — no connectors needed. The compact 36 mm diameter fits most standard motor mounts in 1\/10 scale chassis.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions about the INJORA 540 brushed motor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this motor truly waterproof?\u003c\/strong\u003e Yes, it is labeled as a waterproof brushed motor, so it can handle splashes and wet trails without damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I run it on a 3S LiPo battery?\u003c\/strong\u003e The maximum voltage is 12 V, which is close to a fully charged 3S pack (12.6 V). Use caution and monitor temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e The package includes one brushed motor. No mounting screws or pinion gear are included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow do I choose the right turn count for my RC car?\u003c\/strong\u003e INJORA suggests 35T or 45T for crawlers, 13T\/21T for drift cars, 35T\/45T for monster trucks, and 80T for tractor trucks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INJORA","offers":[{"title":"Default Title","offer_id":58077615063343,"sku":null,"price":26.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4478\/7503\/files\/injora-540-brushed-motor-35t---waterproof-rebuildable-rc-crawler-motor-for-110-scale-1.jpg?v=1781594374","url":"https:\/\/toysforkid.co.uk\/products\/injora-540-brushed-motor-35t-waterproof-rebuildable-rc-crawler-motor-for-1-10-scale","provider":"Toys For Kid","version":"1.0","type":"link"}