{"product_id":"60-pack-pinned-nylon-hinges-for-rc-airplane-3-sizes-foldable-6-holes-each-side","title":"60-Pack Pinned Nylon Hinges for RC Airplane - 3 Sizes, Foldable, 6 Holes Each Side","description":"\u003cp\u003eThis 60-pack of pinned nylon hinges from Yrhrol gives RC model builders a versatile set for connecting ailerons, elevators, and rudders on fixed-wing aircraft. Each hinge has six holes per side for epoxy or glue retention, and the leaves fold up to a 30-degree angle. The pack includes 20 small (0.47 x 0.94 inches), 20 medium (0.63 x 1.14 inches), and 20 large (0.79 x 1.42 inches) hinges, all made from sturdy white nylon. Weighing just 0.6 grams per hinge, they are light enough for foam or balsa models. Designed for DIY hobbyists who want reliable, replaceable hinge points without slop.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Sizes Are in the 60-Pack and How Much Do They Weigh?\u003c\/h2\u003e\n\u003cp\u003eThe assortment covers the most common control surface sizes in park flyers and larger models. Small hinges measure 0.47 x 0.94 inches (12 x 24 mm), medium are 0.63 x 1.14 inches (16 x 29 mm), and large are 0.79 x 1.42 inches (20 x 36 mm). Each hinge weighs 0.6 grams – total pack weight around 1.2 oz (34 g). The small package weight is listed at 0.043 lbs, medium at 0.025 lbs.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (in)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003e0.47 × 0.94\u003c\/td\u003e\n\u003ctd\u003e12 × 24\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e0.63 × 1.14\u003c\/td\u003e\n\u003ctd\u003e16 × 29\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003e0.79 × 1.42\u003c\/td\u003e\n\u003ctd\u003e20 × 36\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDesign and Material – Nylon with a 30-Degree Fold\u003c\/h2\u003e\n\u003cp\u003eEach hinge is molded from white nylon with a pinned center. The two leaves pivot up to 30 degrees, which is enough for typical control throw in sport and scale airplanes. Six holes on each side give you multiple glue‑anchor points. The nylon is strong and resists fuel and vibration – the same material used in many aftermarket RC hinge sets.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Install These Hinges on Different Model Materials\u003c\/h2\u003e\n\u003cp\u003eInstallation method depends on the foam or wood you are using. For KT board (depron‑like foam): cut a slot at each end of the control surface joint, apply hot melt glue inside the slot, insert the hinge, and let cool. The glue locks the hinge so it cannot pull out. For balsa wood: use thin CA (502) glue – apply a few drops into the slot and insert the hinge. Important: keep glue away from the hinge pin itself. If glue gets on the pin, the hinge may bind or lose flexibility.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre these hinges suitable for large gas models?\u003c\/strong\u003e The hinges are marketed for smaller to medium RC airplanes. Large heavy models may need heavier‑duty hinges. Check weight and surface size against your build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the 60-pack include different sizes or only one?\u003c\/strong\u003e It includes three sizes: 20 small, 20 medium, 20 large.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the hole size for glue?\u003c\/strong\u003e The supplied data does not specify hole diameter. Typical nylon hinge holes work with thin or medium CA and epoxy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use these for helicopter or drone controls?\u003c\/strong\u003e They are designed for fixed‑wing control surfaces (aileron, elevator, rudder). For rotary‑wing or multirotor linkages, consult your build guide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yrhrol","offers":[{"title":"Default Title","offer_id":58075953168687,"sku":null,"price":24.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4478\/7503\/files\/60-pack-pinned-nylon-hinges-for-rc-airplane---3-sizes-foldable-6-holes-each-side-1.jpg?v=1781525651","url":"https:\/\/toysforkid.co.uk\/products\/60-pack-pinned-nylon-hinges-for-rc-airplane-3-sizes-foldable-6-holes-each-side","provider":"Toys For Kid","version":"1.0","type":"link"}